Fiber Laser Cylinder Jig

$14.00
This is a pair of 2 3D printed mounts that can be used with cylinders (not for tapered items). Works with items as small as 8mm diameter (like pens, pencils...) or as large as 100mm diameter. Because it's 2 parts they can be positioned any distance apart as needed.

Each jig has 4 mounting holes but really only 2 are needed (I suggest diagonally as in my photos).

These are 3D printed from PLA (plant based plastic) and are made for beds with M6 threaded holes that are 25mm apart on center. Bolts not included.
This is a pair of 2 3D printed mounts that can be used with cylinders (not for tapered items). Works with items as small as 8mm diameter (like pens, pencils...) or as large as 100mm diameter. Because it's 2 parts they can be positioned any distance apart as needed.

Each jig has 4 mounting holes but really only 2 are needed (I suggest diagonally as in my photos).

These are 3D printed from PLA (plant based plastic) and are made for beds with M6 threaded holes that are 25mm apart on center. Bolts not included.