Ryobi One+ 18v Battery Mount

$11.50
This is my own design of a 3D printed battery holder for the Ryobi 18v batteries. Screws to solid wood (2 wood screws included) and simply drop in your battery. If you get 2 or more it's best to space them 3 1/2" apart on center (screw hole to screw hole) or more, this allows ample room between batteries and makes it easy to insert and remove them.

It holds the batteries at a 45 degree angle with gravity only holding in place.

You will receive two 1-1/4" screws to mount to solid wood, other mounting will be at your discretion and hardware. Use only screws with flat pans, don't use tapered head screws or they may split the plastic. Screws only need to be snug, don't over tighten
This is my own design of a 3D printed battery holder for the Ryobi 18v batteries. Screws to solid wood (2 wood screws included) and simply drop in your battery. If you get 2 or more it's best to space them 3 1/2" apart on center (screw hole to screw hole) or more, this allows ample room between batteries and makes it easy to insert and remove them.

It holds the batteries at a 45 degree angle with gravity only holding in place.

You will receive two 1-1/4" screws to mount to solid wood, other mounting will be at your discretion and hardware. Use only screws with flat pans, don't use tapered head screws or they may split the plastic. Screws only need to be snug, don't over tighten